DecoArt Single Paints

239 Colours Available Download Colour Chart PDF As DecoArt's flagship acrylic paint since 1985, DecoArt Americana Acrylics is trusted by more art educators than any other acrylic paint brand in the world. Available in over 200 colours, this all-purpose acrylic paint can be used for a variety of art, crafts, and creating of all kinds. Water-Based Acrylic Paint. Artist Tested Approved Surfaces: wood, walls, canvas, terra cotta, paper, styrofoam, unglazed ceramics, metal, and stone. Not Outdoor Approved. Finish: Matte. Body (Viscocity): Medium. Opacity: varies by colour. Not Bakeable for Dishwasher Safe Finish. Average Dry Time to Touch: 20-30 minutes *may vary with temperature, humidity, etc. Dry Time to Fully Cure: 5-7 days *may vary with temperature, humidity, etc. Directions: Shake well. Apply with a brush or sponge. For pouring techniques, mix paint 1:1 with DecoArt Pouring Medium for best results. Easy soap and water clean-up 

Read more less

Gloss Enamels are multi-surface, gloss, acrylic paints that boast a smooth, thick consistency. Multi-surface, opaque paint that adheres to glass, wood, papier mâché, plastic, resin, ceramics, and many other craft surfaces. Can be baked for a dishwasher-safe finish. Water-based. Soap and water clean-up How to use Gloss Enamels Shake well. Clean surface with alcohol. Apply 1-2 coats with a brush or sponge. Allow to cure 4 days. For a dishwasher-safe finish on oven-safe surfaces, place finished piece in a cool oven, set temperature to 325°F, (160°C) bake for 30 minutes, then cool with oven door partially open. Not for direct contact with food. Suitable for indoor or outdoor use. Cleans up with soap and water. Tips for Gloss Enamels Use a light touch, and try not to apply too much pressure with the tip of the brush. Pushing down too hard will cause the paint to wipe off the slippery surface of the glass. Instead, use a light touch and allow the paint to flow off the brush, creating a pool of colour. This allows you to create thicker, more solid coverage in one step. If you do need a second coat, make sure to let it dry completely first. Avoid overworking or re-stroking wet paint areas too much, or you will end up removing the paint from the glass. Get in and get out of the area. Use a hair dryer on a low setting to speed up the drying time if necessary. A fan can also be used. This can be especially helpful when working on cylinders or pieces with multiple sides. Keep paint away from food surfaces and the areas that will come in contact with your mouth as you don't want to ingest it. Always blot your brush on a paper towel to dry it after rinsing in water. You don't want excess water to remain in the brush while painting. All types of brushes can be used for glass painting, but can provide different results. Synthetic brushes tend to create visible brushstrokes. Soft, natural-hair brushes allow for more paint to be applied in one stroke, creating smoother coverage

Read more less

Electrify wearables, art and craft projects, and home decor with this intense neon paint! Utilizing fluorescent pigment technology, these psychedelic art and craft paints can be used on many surfaces and create vivid glow effects when viewed under a black light. These paints are suitable for indoor and outdoor use and are tested for excellence on wood, walls, canvas, metal, terracotta, paper, ceramics, glass, styrofoam, most plastics, fabric, and masonry. 

Read more less

Americana Chalkboard Paint can transform a wide range of surfaces into chalkboards. Create trendy chalkboard writing surface projects such as memo boards, canister labels, kid's wall décor, and more. Available in 2 oz, 4 oz bottles for smaller craft projects. Soap and water clean-up while wet Brushable formula Made in the USA How to use Chalkboard Paint Shake well. Apply one coat horizontally and allow to dry for one hour. Apply the second coat vertically and allow to dry. Let cure for 24 hours. Condition surface by lightly rubbing the side of a piece of chalk across it Tips for Chalkboard Paint When using on rough or porous surfaces, sand smooth and then prime with Multi-Purpose Sealer.

Read more less

Decoart dazzling metallic paints are a premium, all purpose, permanent metallic paints that adds an elegant shimmer to art, craft, and home decor projects. It's made with the brightest metallic flakes available and delivers excellent, opaque coverage. How to use dazzling metallic: Shake well before using. Apply one well brushed coat using a soft brush or sponge brush. Apply multiple coats when using more transparent colours. Allow to dry thoroughly before applying additional coats or varnishes. To use on fabric: Pre wash and dry fabric first, then apply generously with a soft brush. Dry 48 hours before washing gently in warm water using unscented, mild detergent. Hang to dry. Pearl colours may require second coat. If used on fabric with other acrylic paints that require heat setting, dazzling metallics will not be damaged by heat setting. The garment can be placed in a dryer briefly to remove wrinkles. Do not leave until garment is completely dried as the heat will dull the metallic finish. Tips for dazzling metallics: Do not add drying time extender, fabric medium, or any other medium to any dazzling metallics. It can lessen the intensity of the metallic finish. Dilute with water when needed. Do not use over weathered wood.

Read more less

Experience the magic of colour-shifting paint that changes hue in different angles of light. These interference colours dance and dazzle, and they can create beautiful impact on art and crafts. We do recommend using these colours as a topcoat, either over our Ultra-Black Basecoat paint or over a similar Americana Acrylic colour.

Read more less

Make projects glow in the dark by using Glo-It alone or mix with light transparent acrylic paints or fluorescent acrylics! Can be used on fabric, wood, plastic, paper, styrofoam, candles, walls, pumpkins and ceramic bisque. May be used alone or mixed 1:1 with light, transparent acrylic paints. One-step application and recharges with exposure to light. Ideal for light switches, to mark children's clothing or to add a luminescent effect for craft projects. Made in United States. Non-toxic.

Read more less

Glow in the Dark Paint will add luminescence to most surfaces when charged with light. May be used alone or mixed with lighter colours of acrylics. Ideal for Halloween crafts, adding stars to the walls of kids' rooms, and decorative painting highlights. For best results charge under fluorescent or LED light for a minimum of 45 minutes. Medium must be mixed with the paint appropriate for the chosen surface. When using on fabrics, add Fabric Medium following label instructions for drying and heat setting.

Read more less

Add a classic, matte metallic sheen to home decor projects, crafts, and paint projects. Curing to a durable hard finish, this formula offers excellent adhesion to a variety of surfaces. Its ultra-fine pigments deliver a rich finish that is perfect for subtle-accenting or full-coverage application. This multi-purpose art and craft paint cures to a durable matte finish. 

Read more less

Metallic Lustre is a water-based metallic wax that buffs to a brilliant shine. It features highly concentrated pigments and boasts an opaque coverage with only one coat. Metallic Lustre adheres to most absorbent surfaces, as well as metal. Because Metallic Lustre is a paste, it allows for more control during application than liquid paint. Water based acrylic paint. Not outdoor approved. Artist Tested Approved Surfaces: canvas, wood, MDF board, terracotta, styrofoam, walls, unglazed ceramics. Finish: Metallic. Not bakeable for a dishwasher safe finish. Directions: Apply to surface with soft cloth or sponge. Buff to a brilliant sheen. Seal with Americana Spray Sealers for added durability and outdoor exposure. Clean up with soap and water. TIPS FOR METALLIC LUSTREWhen applying to dimensional surfaces, using a small stiff brush or stencil brush will make it easier to get into the crevices. Use a stencil brush and a swirling motion to stencil metallic designs on project surfaces. Buffing with a soft cloth increases the sheen.

Read more less